The importance of selecting and designing the right lighting solution for each department is critical. From Seafoods to Produce to Meats. Bad lighting can simply make food look bad and less enticing to buy.
We have worked with large retailers helping them meet their corporate spec requirements for lighting and also helping them design their own specs in some cases.
We understand the challenges of change when considering an upgrade to LED. Make sure to have a system that compliments your products and helps customers make the decision to buy with confidence.
If you have considered converting your Grocery store to our experts would be glad to help you with a lighting design report, as well as an ROI report showing you the savings on electrical consumption and maintenance savings.
LED Lighting Benefits
Reduced Maintenance Cost
LED are rated for a performance of up to 100,000 hours. Most fluorescent, incandescent, HPS and others have to be replaced a minimum of 4-15 times during the lifetime of the LED.
Lumen Level Maintenance
Each type of light during its lifetime drops the lumen output. The biggest drops in lumen value are incandescent which can drop upto 30% in the first 1000 hours. Meaning you get 30% less.
Cold Temperature Operation
WIth a low temperature there is much more voltage required to start a light as well as the intensity of the light decreases. The bonus of LED Lighting is that there is actually a performance .
Instant On Demand Lumens
Unlike incandescent and fluorescent which can require from 2-3 minutes to 15 minutes to warm up and reach their maximum lumen levels, an LED turns on instantly providing 100% .
Whether you currently use fluorescent, incandescent halogen etc… LED lighting will cut your bill in half immediately. There are other factors to energy savings explained .
Lighting Design Efficiency
It’s not only the energy consumption that saves you money on the power bill it is also the efficient design of led that can be pointed in exactly the direction needed. For example a fluorescent .
Most traditional light bulbs are made from glass. LED lights are mainly composed of a circuit board with LED diodes covered in a metal or heavy duty plastic to protect it.
UV Emission Free
Over the last few years the reason business has been slowing down for most tanning salons is due to the fact that UV rays may cause burns and skin cancer. This of course .